Some Great Tips on Stained Glass Painting and Workshop Safety
If you're new here, you may want to subscribe to my RSS feed. Thanks for visiting!
With stained glass, you will want to start with your design on paper. Make sure there is some definition to your design and that the differently colored areas are outlined in a darker color. You may tape your design to the bottom of your glass so that it will remain in place during painting. Begin painting the dark outlines of your design with a tracer or rigger (long brush with a slender point). You will want your trace paint to be dark enough to block out light and provide contrast with your lighter colors. You must apply the outlines in long, smooth, continuous strokes. Do not try to “go over” your lines once they have dried (which does not take long!).
Painting on stained glass is done to add humanistic details of the face, hands, feet, or shading of the body and hair. Painting reduces the amount of cutting and leading of many tiny pieces of stained glass. Painting enhances the beauty, textures, and color that are already in the stained glass.
You can spend as little or as much as you want on stained glass painting tools and supplies. You can get started for as little as $20 to $100. You can save money by making some of your own stained glass painting equipment. Suppliers for stained glass paints and tools can be found by searching on the internet and at craft and supply stores. Be careful of the paints you choose because the paints for stained glass painting are specific.
Your work area does not have to be large. It could be an area set aside in your stained glass workshop with a good source of natural light from a window. You need plenty of storage including a palette box for storing the color palettes you make. You will need squares and rectangles of scrap clear glass, ground and rounded on the edges to prevent cutting yourself. These scraps will be for practicing your stained glass painting and tracing technique.
A few good brushes, spatulas, a small easel with a thick-plated glass surface, a light box and an inexpensive small, electric kiln would be a good start on supplies needed to do stained glass painting. In order to save money, you could build your own easel and light box and purchase a used kiln from ads in stained glass magazines or online. You can also make your own unique sticks and bridges which are wooden supports for your hand and arm for helping with paint stroke technique.
Your workshop safety tips
When carrying sheets of stained glass, wear gloves that help you have a good grip on the glass. The gloves should protect your hands from cuts from the razor sharp edges of the stained glass. Grip the glass on each side. Carrying it with one hand on top and one on bottom creates a hazard that the glass could snap in two. If you grip from each side and the sheet of stained glass breaks, you have a better chance of letting the glass slip away from you without being cut.
While grinding your stained glass, wear goggles that shield your eyes from all sides to prevent glass particles from getting in your eyes from underneath since the grinder is below eye level. It would also be a good idea to wear a paper mask to prevent breathing in the glass particles and dust that could be harmful to your sinuses and lungs.
Sometimes new stained glass crafters don’t have a workshop and think they can begin by working at their kitchen table or counter. That is a definite risk of exposing you and your family to lead poisoning, chemical contamination, and hazards from the shards of stained glass. It would be better to set up a space in your garage or an unused room. Some stained glass shops will allow you to rent bench time.
Make sure to know what you doing when working on stained glass because you don’t want unnecessary injuries. So read all you can about safety precautions.
Tags: Art
Popularity: 27% [?]
Sphere: Related Content